A8L Quattro Sedan V8-4.2L (BVJ) (2007)
‹› Broken lines identify the initial position.
‹› Before installing crossmember - 3 -, make sure that spacer bushing is located in initial position.
‹› If necessary, spacer bushing (left-hand thread) must be screwed in completely.
5 - Carrier Bushing
‹› Plastic part, pressed into spacer bushing - 4 -.
‹› No replacement part
6 - Cross Member
7 - Lower Threaded Bushing
‹› No replacement part
8 - Threaded Plate
‹› Riveted to longitudinal member from below with tubular rivet - 9 -.
9 - Tubular Rivet
Removing Electrical Connector Coupling
-
Before removing trailer hitch, fold connector coupling bracket downward and remove bolts - 3 - from bracket - 1 -.
-
Remove connector coupling from bracket - 1 -.