A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Trim Panel: Service and Repair
Side Luggage Compartment Trim, Removing and Installing
Side Luggage Compartment Trim, Removing And Installing
1
-
Luggage compartment side trim
Removing
-
Remove luggage compartment floor covering covering.
-
Remove rear cross panel trim.
-
Open upper fasteners - 2 -.
-
Remove storage compartment - 3 -.
-
Remove socket.
-
Raise securing ring - 4 - (4x).
-
Loosen two cross-head bolts - 5 - in each of securing rings.-Unfasten clips - 10 -.
-
Remove luggage compartment side trim.
Installing
Install in reverse order of removal. Note following:
-
On completion of installation, fold rear lid rubber seal over luggage compartment side trim - 1 -.
2
-
Upper fastener
-
Qty. 2
-
For storage compartment - 3 -
3
-
Storage compartment
4
-
Securing rings
5
-
Bolt
-
Qty. 2 per securing ring
-
Tightening torque: 5 Nm
6
-
Speed nut
-
Qty. 3
-
Always replace after removing
7
-
Rain channel trim
-
Removing rain channel trim from luggage compartment side trim/assembling.
8
-
Cap
-
Assignment Parts List