A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6780002.png)
-
Connect harness connector for ventilation light - 5 -.
-
Guide air channel - 4 - into hole on shell construction sill.
-
Press on lower B-pillar trim - 2 -.
-
Install bolts - 3 - (Qty. 2).
-
Clip in lower A-pillar trim and wheelhousing trim.
CAUTION!
Ensure trim is held securely.
-
Make sure that door rubber is pulled cleanly over upper B-pillar trim - 2 -.
3 - Screws, (Qty. 2)
4 - Air duct
5 - Harness connector for ventilation light.
