A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6784002.png)
-
Remove garment hook => [ Garment Hook ]. See: Service and Repair/Removal and Replacement/Trim/Garment Hook
-
Remove screw - 4 -.
-
Unclip upper A-pillar trim in area of the D-pillar trim.
-
Remove screw - 2 -.
-
Unclip upper D-pillar trim - 3 - at clips - 1 - (Qty. 2).
-
Remove upper D-pillar trim - 3 - inward.
‹› Installing
-
Install D-pillar trim - 3 - in reverse order of removal.
CAUTION!
Ensure trim is held securely.
-
Make sure that door rubber is pulled cleanly over D-pillar trim.
4 - Screw
‹› Tightening torque: 4 Nm
‹› self-locking
‹› replace
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
