A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Brake Pedal Assy: Service and Repair
Brake Pedal Mounting Bracket
Brake Pedal Mounting Bracket
Removing
-
Remove trim on driver's side.
-
Brake booster, removing and installing => [ Brake Booster ] See: Power Brake Assist/Vacuum Brake Booster/Service and Repair/Brake Booster.
-
Remove brake light switch => [ Brake Lamp Switch ] See: Lighting and Horns/Brake Light Switch/Service and Repair.
-
Disconnect brake pedal from brake booster => [ Brake Pedal, Separating from Brake Booster ] See: Brake Pedal, Separating from Brake Booster.
-
Remove connections - 1 -.
-
Mounting bracket - 2 -
-
Bulkhead item - 3 -
Remove gas pedal
-
Remove hex socket head bolts .
Remove brake pedal mounting bracket
-
Remove bolt, Torx socket (T45) - item 4.
Installing
Installation is in reverse order of removal, with special attention to the following:
Joining brake pedal to brake booster
-
Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.=> [ Clip
brake pedal together with
brake booster ] See: Brake Pedal, Separating from Brake Booster
-
Adjust brake light switch/brake pedal switch => [ Brake Lamp Switch ] See: Lighting and Horns/Brake Light Switch/Service and Repair.
-
Bleed brake system => [ Brake System Bleeding ] See: Brake Bleeding/Service and Repair/Brake System, Bleeding.