A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-3702008.png)
Shown on VAS 5051 display:
^
"Channel 6, reading and testing" is shown in display field - 1 -.
^
The pad thickness values determined are shown in area - 2
^
A slide bar with a code for current saved pad thickness appears in area - 3 -.
-
The pad thickness can change within the determined limits (3 to 14) via the slide bars.
Note:
^
If a pad thickness is entered using the slide bar that lies outside the determined thresholds, this is shown but not implemented.
^
If a pad thickness that is too large or too small is entered via the slide bar, the display resets itself.
Entry can also be done using keypad.
-
Press button - 4 - (to enter via keypad).
Shown on VAS 5051 display:
^
The display "Enter adaptation value entry value: 0 to 65535" appears in display field - 1 -.
^
An entry keypad is shown in display field - 2 -.
-
Enter previously measured pad thickness via entry keypad in display field - 2 - and confirm by pressing Q button.
Shown on VAS 5051 display:
^
The new pad thickness value entered appears in area 3 - above slide bar.
-
Save new pad thickness by pressing button - 5 -.
