A8L Quattro Sedan V8-4.2L (BVJ) (2007)
‹› Use protective backings.
-
It should no longer be possible to remove the protective cap from the brake caliper housing by hand.
-
Thinly coat piston and seal with Assembly Paste before inserting.
-
Lift the brake piston, as shown, with commercially available extension and ratchet adapter and lightly press against the protective cap.
Do not angle piston, to avoid damaging the seal sleeve.
-
Blow the protective cap on with pressurized air (maximum 3 bar). The protective cap will thereby jump over the brake piston.