A8L Quattro Sedan V8-4.2L (BVJ) (2007)
‹› Apply a thin coat of Lithium Grease to = threads before installing.
6 - Bushing
‹› Insert in brake caliper housing
7 - Brake caliper housing
8 - Retaining spring
‹› Observe correct installed position.
‹› Hook in at both brake caliper housing studs and at outer brake pad retaining spring.
9 - Protective cap
‹› Do not damage when installing piston
‹› Coat with Assembly Paste.
10 - Pistons
‹› First apply thin coat of brake cylinder paste on piston
‹› Allocation => [ Brakes ] See: Specifications/Brakes
11 - Sealing ring
‹› Coat with Assembly Paste