A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Cruise Control Switch: Service and Repair
Turn Signal Switch
Steering Column Switch Module
Turn Signal Switch
Removing
-
Remove the steering column switch module. Refer to => [ Steering Column Switch Module ]. See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Column Control Module/Service and Repair/Steering Column Switch Module
‹› Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.
-
Carefully release catches - arrows -.
-
Pull return spring with slip ring - 2 - with steering angle sensor (G85) - item 1 - off from steering column switch module (SCSM).
-
Remove screws - arrows -.