A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Oil Filter Adapter: Service and Repair
Oil Filter Housing
Oil Filter Housing
Removing
-
Remove intake manifold.
‹› To collect escaping engine oil, place a clean cloth around oil filter housing.
-
Remove cover and remove oil filter insert.
-
Remove bolts - arrows - and remove oil filter housing.
Installing
‹› Tightening specifications => [ Oil Filter Housing Assembly Overview ] See: Oil Filter Housing/Service and Repair/Oil Filter Housing Assembly
Overview.
Installation is in reverse order of removal, note the following:
‹› Replace sealing rings and O-rings.
-
Install intake manifold.
-
Check oil level. Refer to => [ Oil Level, Checking ] See: Testing and Inspection/Component Tests and General Diagnostics.