audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Tail Lamp Control Module > < Outer Tail Lamps Component Overview, Through 08.07|Page 21737
Page 4
background image

-

Disconnect the electrical connectors - 1 - and - 2 - on the socket - 3 - with the bulb.

Installing

Install in reverse order of removal, observing the following:

  ‹› The flat side of the connector must face toward the socket with bulb.

-

Install inner rear lamp. Refer to => [ Inner Tail Lamps ] See: Inner Tail Lamps, Through 08.07.

Tightening Specifications

 

Tail Lamp Control Module > < Outer Tail Lamps Component Overview, Through 08.07|Page 21737