A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-4411001.png)
Wiring Harness: Procedures
Primary Lock
Contact Housings, Releasing and Disassembling
Primary Lock
‹› The primary lock is the locking mechanism of an individual crimp contact in the connector housing.
‹› If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer
to => [ Secondary Lock ]. See: Secondary Lock
‹› The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the
primary lock.
‹› Allocation of the correct release tool to the respective locking mechanism. Refer to the VAS 1978/35 operating instructions.
