A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-2642002.png)
‹› If measured value is 0 ohms there is a short circuit. If measured value is infinite ohms there is and open circuit in the wiring.
‹› To check resistance values "tank full" or "tank empty", the Fuel Level Sensor (G) must be removed. Refer to => [ Fuel Level Sensor 1, Left
Lever-Type Sensor ] See: Fuel Delivery and Air Induction/Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Level Sensor 1, Left
Lever-Type Sensor and the floater of the sensor must be placed in upper or lower end position.
‹› With Fuel Level Sensor (G) removed, the following values are obtained because of the greater deflection of the floater arm:
