A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Specified value: 22,0 to 30,0 ohms.
If the specified value was not obtained:
-
Replace the Evaporative Emission (EVAP) Canister Purge Solenoid Valve 2 (N115).
If the specification is obtained:
Checking voltage supply
-
Using a Multimeter, check the electrical harness connector terminal 1 to 2 for voltage.
-
Crank the engine.
Specified value: battery voltage.
If the specified value was not obtained:
-
Using a Multimeter, check the electrical harness connector terminal 1 to Ground (GND) for voltage.
-
Operate the starter briefly.
Specified value: battery voltage.