A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-2856012.png)
-
Slide the combustion chamber seal as far possible onto the (T10133/5) using the (T10133/6).
-
Turn the (T10133/6) around and slide the combustion chamber seal into the groove.
‹› When pushing the combustion chamber seal onto the fuel injector, the seal spreads open. Therefore after pushing it on, it must be tightened again
in 2 steps, as follows:
-
Press the (T10133/7) with a slight turning motion (approximately 180 degrees) onto the fuel injector until it stops.
-
Pull the (T10133/7) off again, turning it in the opposite direction.
