A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-2879002.png)
6
Bolt, 2.5 Nm
7
Intake Manifold Runner Position Sensor (G336)
‹› Cylinder bank 1.
‹› After replacing, perform "Adaptation" in "Guided Fault Finding" using the vehicle diagnostic, testing, and information system (VAS 5051B).
8
Gasket
‹› Replace if damaged.
‹› The open side faces the intake manifold runner position sensor.
9
Intake Manifold
‹› Removing and installing, refer to => [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake
Manifold and Injectors, with Magnesium Manifold.
10
O-ring
‹› Always replace.
11
Intake Manifold Support
12
Bolt, 9 Nm
13
Throttle Valve Control Module (J338)
‹› After replacing, perform "Adaptation" in "Guided Fault Finding" using the vehicle diagnostic, testing, and information system (VAS 5051B).
14
O-ring
‹› Always replace.
15
O-ring
‹› Always replace.
16
Bolt, 9 Nm
17
Crankcase Housing Ventilation Pressure Regulator Valve
18
Bracket
‹› For the vacuum hose.
19
Bolt, 9 Nm
20
Bolt, 9 Nm
21
Bolt
‹› Tightening specification and sequence, refer to => [ Intake Manifold Tightening Sequence ].
22
Intake Manifold Seals
‹› Always replace.
23
Gasket
‹› Replace if damaged.
‹› The open side faces the intake manifold runner position sensor 2.
