A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor 3, Left Tubular Sensor
Fuel Level Sensor 3, Left Tubular Sensor
Special tools, testers and auxiliary items required
‹› Wrench (T10202)
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] See: Fuel Delivery and Air Induction/Service Precautions/Vehicle Damage
Warnings/Safety Precautions.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Fuel Delivery and Air Induction/Service Precautions/Vehicle Damage
Warnings/Clean Working Conditions.
CAUTION!
‹› To remove the tubular sensor, the left chamber of the fuel tank may only be filled to a maximum of 1/3. Procedure to empty the fuel
tank. Refer to => [ Fuel Tank, Draining ] See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Procedures.
CAUTION!
Observe measures when connecting battery.
-
With ignition switched off, disconnect Battery Ground (GND) cable - arrow -.
-
Open fuel filler flap briefly and then close again.
-
Remove the luggage compartment floor mat.