A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
Check whether recess in housing of ignition coil for gas-discharge lamp and recess in contact ring exactly coincide - arrows -.
-
Position ignition coil for gas-discharge lamp at headlight and turn clockwise as far as it will go.
-
Ignition coil must be easily turned.
-
Arrow on housing faces upwards
-
Connect harness connector.
-
Close housing cover and secure with screw.
-
Install front wheel housing liner.
-
Connect battery. Required actions.
-
Deactivate vehicle lift mode.