A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Humidity Sensor: Service and Repair
Humidity Sensor, With Lane Assist
Switches
Humidity Sensor, with Lane Assist
-
If the humidity sensor (G355) was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided
Functions".
-
Pry the top cover - 1 - from the interior rearview mirror base - arrows -.
-
Remove front interior light. Refer to=> [ Front Interior Lamp with Roof Electronics Control Module, from 09.07 ] See: Lighting and Horns/Dome
Lamp/Service and Repair/Front Interior Lamp with Roof Electronics Control Module, from 09.07.
-
Remove interior mirror.
-
Remove screws - arrows -.
-
Unclip cover for sun visor center support and remove bolts.
-
Remove the sun visor center support.
-
Unplug connector - arrow - at front interior light.