A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
Tighten to 120 Nm
7. Seal
-
Replace
-
Install dry
8. Right locking flange
-
Installed location
9. Fuel return line
-
To left fuel delivery unit
10. Fuel supply line
-
From left fuel delivery unit
-
To disconnect, press release button on connection piece
11. Suction jet pipe
-
For suction jet pump
-
To disconnect, press release button on connection piece
12. Fuel delivery line
-
From suction jet pump, left side
-
Clipped onto fuel delivery unit - 14 -
13. Fuel filler tube
-
Fuel filler tube
-
Clipped onto fuel delivery unit - 14 -
14. Right fuel delivery unit
-
With Fuel Pump (FP) G23
-
Clipped into mount - 1 -
-
Fuel pump electrical, checking.
-
Checking residual pressure.
-
Removing and installing.
-
After installing, fuel vehicle with at least 5 liters of fuel
Installed location of right locking flange
-
Install new locking flange seal dry.
-
Insert locking flange in fuel tank, note installation position:
-
Tab - 2 - on locking flange must lie between tabs - 1 - and - 3 - on fuel tank.