A8L Quattro Sedan V8-4.2L (BVJ) (2007)
‹› Bushing replacing, refer to => [ Track Control Arm Bushing ] See: Suspension/Control Arm/Control Arm Bushing/Service and Repair/Track
Control Arm Bushing.
15
Self Locking Nut, 70 Nm + 180° additional turn
‹› Always replace.
‹› Raise the wheel bearing housing before tightening. Refer to => [ Wheel Bearing Housing, Raising to Control Position to Tighten Bolts ] See:
Suspension/Wheel Bearing/Service and Repair/Procedures/Front Suspension.
16
Bolt
‹› Always replace.
17
Bolt
‹› Always replace.
18
Self Locking Nut, 8 Nm
‹› Always replace.
19
Bolt, 90 Nm + 90° additional turn
‹› Always replace.
‹› Raise the wheel bearing housing before tightening. Refer to => [ Wheel Bearing Housing, Raising to Control Position to Tighten Bolts ] See:
Suspension/Wheel Bearing/Service and Repair/Procedures/Front Suspension.
20
Bolt, 5 Nm
21
Left Front Level Control System Sensor (G78) and Right Front Level Control System Sensor (G289)
‹› Note that there are different versions with a "long" or "short" lever.
Only use the same version of the sensor. Do not install both versions together.
‹› Only remove and install or replace completely. Refer to => [ Front Level Control System Sensor ] See: Suspension/Suspension Control (
Automatic - Electronic )/Service and Repair/Level Control System.
‹› The sensor lever must face forward.