audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Front Subframe Mount > < Front Subframe|Service and Repair|Page 13659
Page 9
background image

-

Connect the electrical connectors to the left and right level control system sensors.

-

Install the left and right connecting links - 2 -. Refer to - item 15 - in => [ Mounting Bracket, Upper Control Arms and Air Spring Damper
Assembly Overview ] See: Suspension Control ( Automatic - Electronic )/Air Spring/Service and Repair/Removal and Replacement/Front
Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview and - item 18 - in => [ Subframe, Engine Carrier
and Stabilizer Bar Assembly Overview ] See: Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Engine Carrier and Stabilizer Bar
Assembly Overview.

-

Install the bolt - 3 - from air spring damper to the control arm. Refer to - item 19 - in => [ Mounting Bracket, Upper Control Arms and Air Spring
Damper Assembly Overview ] See: Suspension Control ( Automatic - Electronic )/Air Spring/Service and Repair/Removal and Replacement/Front
Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview.

-

Connect the connecting piece - 1 - to the residual pressure valve - 2 -. Refer to - item 23 - in => [ Mounting Bracket, Upper Control Arms and Air
Spring Damper Assembly Overview ] See: Suspension Control ( Automatic - Electronic )/Air Spring/Service and Repair/Removal and
Replacement/Front Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview.

-

Install the noise insulation.

-

Install the wheels and tighten.

-

Place the vehicle on its wheels. Refer to => [ Positioning Vehicle on the Hoist and on its Wheels ] See: Service and Repair/Procedures/Positioning
Vehicle on the Hoist and on its Wheels.

-

Perform a vehicle alignment. Refer to => [ Wheel Alignment ] See: Alignment/Service and Repair/Procedures/Wheel Alignment.

-

After the vehicle alignment, tighten the subframe bolts to the correct additional angle.

-

Readapt the control position. Refer to => [ Control Position, Programming ] See: Suspension Control ( Automatic - Electronic )/Description and
Operation/Level Control System.

Front Subframe Mount > < Front Subframe|Service and Repair|Page 13659