A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Air Spring: Procedures
Air Spring Damper Boot, Correcting Pressure Points
Air Spring Damper Boot, Correcting Pressure Points
Special tools, testers and auxiliary items required
‹› Compressed air gun (commercially available)
‹› Cloths
-
Lay the cloths - 1 - under the lower connection point and blow compressed air through a ventilation slit - arrow A - using the compressed air gun
(narrow nozzle) - 2 -.
‹› Increase the pressure only until the boot inflates slightly. This presses the indentations - B arrows - outward.
-
If the indentations are not pressed out, press them out by hand. Slide the boot upward out of the lower retainer if necessary.