A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-4983002.png)
-
Open clamp -1- and detach suction hose -2- from connection piece -3-. Unscrew air line from air supply unit -arrow-.
-
Unscrew nuts -4- and remove air supply unit.
Note:
Shown without bumper for ease of illustration.
Installing
Installation is in reverse order. Note:
-
The tightening torques of bolts/nuts and information on whether the bolts/nuts must be replaced => (assembly overview: air supply unit).
-
Install front noise insulation.
-
Install the wheel housing liner.
-
Install and tighten wheel.
