A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Compressor/Pump: Removal and Replacement
Solenoid Valve Block, Removing and Installing
Solenoid valve block, removing and installing
Special tools and equipment
^
VAG 1331 Torque wrench
^
VAG 1783 Torque wrench
^
VAG 1783/1 Spanner attachment (10 mm A/F)
Removing
Note:
The solenoid valve block is installed on the A-pillar on the left behind the wheel housing trim.
-
Place vehicle on lifting platform.
-
Bleed system.
-
Remove wheel trim, detach trim cap for light-alloy wheels (puller in vehicle tool kit).
-
Remove wheel.
-
Secure brake disc with a wheel bolt.
-
Remove wheel housing liner.
-
Detach connector -1-.
-
Unscrew air lines -arrows-.
-
Protect air lines from contamination.