A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Shifter A/T: Removal and Replacement
Shift Mechanism Function Unit, Removing and Installing
Shift mechanism function unit, removing and installing 09E, 6 Speed A/T
Special tools, testers and auxiliary items required
^
Pry lever 80 - 200
Removing
-
Place selector lever in position "D"
-
With ignition switched off, disconnect battery Ground (GND) strap.
-
Remove selector lever handle.
-
Remove front ashtray.
-
Remove center console trim.
-
Pull electrical connector - 1 - out of protective sleeve - 2 -.
-
Disconnect electrical connector - 1 - for circuit board.
-
Disconnect electrical connector - 3 - for Shift Lock Solenoid N110.
Note:
^
Connector - 3 - is also covered by a protective sleeve.