A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
Tighten bolts - 1 - and - 2 - for mechatronics unit to 2 Nm.
-
Tighten bolts for mechatronics unit to 8 Nm in specified order, i.e. first bolt - 1 -, then - 2 - and so on through - 11 -.
-
Attach locking clip - A - for wiring harness connector - B -.
-
Install ATF screen.
-
Install oil pan.
-
Rotate electrical connector at left of transmission clockwise opposite direction of - arrow - and remove.
-
Connect battery.
-
Top off ATF.