A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
Remove the main catalytic converters.
-
Make sure there is a marking on the driveshaft and on the flange/driveshaft on the rear final drive - arrows A and B -.
-
If no marking can be found, mark the position of the driveshaft flange - arrow A - to the rear final drive - arrow B - in color.
-
Attach the (3139) with (3139/4) and tighten the plastic nuts.
‹› Never install assembly appliance onto balance plates.
-
Remove bolts - arrows - securing center bearing.