A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-3414005.png)
-
Replace seals for driveshaft at transmission/rear final drive flange. Clean sealing surfaces and glue on new gaskets.
-
Install the driveshaft and fasten it to the rear final drive - arrows - and to the transmission with the new bolts.
-
Screw in securing bolts - arrows - so that center bearing can still be moved.
-
Tighten bolts - 1 - on the front and rear ends of the driveshaft to tightening specification - 5 - => [ Hex Socket Head Bolt ] See: Drive Shaft
Assembly Overview.
-
Use the (T10172) with the (T10172/5) to do this.
