A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Installing
Installation is performed in the reverse order of removal. Pay attention to the following:
-
Coat outer edge of gasket with axle oil.
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
-
Drive new seal in as far as the stop; be sure not to distort seal.
-
Position the flange/driveshaft - B - on the drive pinion - A - so the marking - arrow - is aligned.
-
Install the (VW 771/40) in the drive pinion threaded hole.