A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Flex Plate: Service and Repair
Drive Plate
Drive Plate
Special tools, testers and auxiliary items required
‹› Counter-Holder Tool (10 - 201)
Removing
‹› Engine or transmission removed.
-
Insert Counter-Holder Tool (10 - 201) to loosen bolts.
-
Identify position of drive plate to crankshaft with a felt-tip pen for reinstallation.
-
Remove drive plate.
-
Remove shim from behind it.
Installing
‹› Tightening specifications. Refer to => [ Drive Plate Assembly Overview ] See: Drive Plate Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace bolts which have been tightened to torque.
-
Install drive plate with shim.
-
Turn over Counter-Holder Tool (10 - 201) to tighten bolts.