A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
Cut the first section open, while doing this, the wire is guided into the integrated roller - arrow - on the spool
-
Insert an additional guide awl - 2 - into the adhesive and secure it to the windshield with the suction cup as illustrated to make sure that the wire
runs as close to the windshield as possible.
-
If necessary, move the protective foil - 3 - along with the wire and cut the windshield free with the spool - 1 -.
-
Move the spool and the guide awl as illustrated and cut free the section along the A-pillar.