A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
To disconnect the connection, press the circlip - 1 - - arrow - and remove the hose connector.
-
To connect, hold the circlip pressed - arrow - and attach the hose connector.
-
Make sure the connection is engaged securely by pulling on the hose without pressing the circlip.
Headlamp Washer System Hose Coupling with Clamp
-
To disconnect the hose clamp connection - 1 -, cut with side cutting pliers and remove the hose connector.
-
To connect, slide the new hose clamp onto the hose, attach the hose connector and install the hose clamp with (V.A.G 1275).
Headlamp Washer System Hose Coupling with Spring Clamp