A8L Quattro Sedan W12-6.0L (BSB) (2005)
Installation is performed in reverse order of removal, noting the following.
‹› Replace seal.
-
Using rotating plastic brush, remove any remaining sealant from lower part of oil pan and upper part.
CAUTION!
Wear safety glasses.
-
Clean the sealing surfaces, they must be free of oil and grease.
-
Cut tube nozzle at front marking (nozzle dia. approximately 2 mm).
-
Apply sealant bead - arrow - on clean sealing surface of lower part of oil pan as shown in illustration.