audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Molded Headliner and Sun Visors (Avant), Removing and Installing|Page 12877 > < Molded Headliner and Sun Visors (Avant), Removing and Installing
Page 2
background image

-

Remove roof frame trim.

-

Remove upper D-pillar trim.

-

Remove roof frame trim.

-

Detach connector if interior mirror is of automatic anti-glare type.

-

Remove sun visors - 7 -.

-

Remove holders - 5 - for sun visors.

-

On models with sunroof, pry out frame trim - 4 -.

-

Remove cover for molded headliner cutout and reading lamp Fig. 1.

-

On models with sunroof: Remove screws - 10 - (3x).

-

On models without sunroof: Remove screws - 10 - (2x)

-

Tilt backrest of passenger seat as far back as possible.

-

Tilt backrest of driver's seat as far back as possible.

-

A second person is required to support the molded headliner.

Molded Headliner and Sun Visors (Avant), Removing and Installing|Page 12877 > < Molded Headliner and Sun Visors (Avant), Removing and Installing