Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-3039004.png)
-
Install new parts as follows.
CAUTION!
Part numbers are for reference only.
Always check with your Parts Dept. for the latest parts information.
^
Clamp torque = 1 +/- 0.3 Nm.
Note:
Use extreme care to property install the intake air duct to the Throttle Valve Control Module -J338- using new clamps in the original positions on the
intake air duct.
-
Reinstall upper engine cover.
-
Clear any stored DTC's.
-
Set readiness code.
When procedure applies to vehicles within the New Vehicle Limited Warranty, use the information shown.
