Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-1612002.png)
^ Position and Secure NEW harness adaptor with (qty 3) Tie Wraps -arrows- as shown.
NEW auxiliary coolant pump, installing:
^ Assemble NEW auxiliary coolant pump -2- and Bracket -1-.
^ Hook rubber mount of pump in lower bow of bracket -arrow- first and tighten bolt -3- Part No: N 101 244 08 to a torque of 9 Nm.
^ Install 2 coolant hoses onto fittings of coolant pump as shown.
^ Adjust coolant hoses so that the position mark of each hose is in line with position mark of pump fittings -arrows-.
^ Secure coolant hoses with 2 NEW spring clamps (included in kit).
^ Locking tab of each spring clamp must be located in center of X-mark of each coolant hose (arrows).
