Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-1613003.png)
^
Assemble NEW auxiliary coolant pump -2- and Bracket -1-.
^
Hook rubber mount of pump in lower bow of bracket -arrow- first and tighten bolt -3- Part No: N 101 244 08 to a torque of 9 Nm.
^
Install 2 coolant hoses onto fittings of coolant pump as shown.
Adjust coolant hoses so that the position mark of each hose is in line with position mark of pump fittings -arrows-.
^
Secure coolant hoses with 2 NEW spring clamps (included in kit).
Tip:
Locking tab of each spring clamp must be located in center of X-mark of each coolant hose (arrows).
