Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-1615002.png)
-
Pull off brake servo hose -1- at bulkhead.
-
Disconnect earth wire from exhaust temperature sender (left side).
-
Unscrew exhaust temperature senders from intake manifold (left and right sides) Refer to Fitting locations overview.
-
Remove coolant reservoir-arrows and move it clear to the side.
Note: Leave coolant hoses connected.
-
Unplug connector from coolant level monitor.
-
Remove cover panel from cylinder head cover (cylinder bank 4-6).
