Allroad Quattro V6-2.7L Turbo (APB) (2002)
-
Pull off valve stem seal using 3364.
-
To prevent damage to new valve stem seals, place plastic sleeve -A- on valve stem.
-
Lightly lubricate sealing lip with oil.
-
Insert valve stem seal -B- (without oiling outside of seal) into fitting tool 3365 and carefully push it down onto the valve guide.
Note: When fitting new valves, lightly oil valve stems before installing.
Reworking valves
Valves must not be reworked. Only grinding-in (lapping) is permitted.
WARNING: Note precautions required when disposing of sodium-cooled exhaust valves