Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-1555005.png)
-
Pre-tension toothed belt by turning in direction of arrow with a torque of 15 Nm using a torque wrench.
-
Tighten bolts on camshaft sprockets.
-
Install idler wheel for ribbed belt -arrows-.
-
Install toothed belt guard behind vibration damper-arrows-.
-
Install vibration damper. Note positions of locating lugs -arrows- on belt sprocket.
-
Install toothed belt guard.
-
Install ribbed belt. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
