Allroad Quattro V6-2.7L Turbo (APB) (2002)
-
Remove bolts -A-.
-
Lift A/C control head -B- up slightly and remove in direction of arrow.
NOTE: In these vehicles, A/C control head is held underneath by latching tabs -C- and -D-.
-
All models
-
Press back harness connector release catches -F- and disconnect harness connectors -A- through -D-.
-
Press back harness connector releases catches -G- and disconnect harness connector -E- (for rear window heating).
NOTE:
-
The display panel and control buttons are illuminated with LEDs (which cannot be replaced).
-
Different versions of A/C Control Head -E87- are available as replacement parts depending on vehicle equipment (for example, with or without
openings for heated seat switches).
-
To remove heated seat switch, press back retainer tabs -A- and pull switch -B- out of A/C Control Head -E87- from behind.
-
If Instrument Panel Interior Temperature Sensor -G56- is giving an incorrect reading, make sure intake grill on panel is not obstructed.