Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-5399004.png)
-
Disconnect both harness connector for fuel gauge -1- and -2- on inside of closing flange.
-
Disengage distributor connector -1- at lower part of accumulator by pressing distributor connector slightly to left side of vehicle and lift upward
-arrow-.
-
Release return line -2- from distributor connector and disconnect.
NOTE: For better illustration purpose the accumulator is shown without fuel tank.
-
In addition, unlock quick coupling line connector of return pipe with Unblocking Tool T40020.
