Allroad Quattro V6-2.7L Turbo (APB) (2002)
-
Install drain plug -1- and tighten to - 12 Nm (9 ft lb).
-
Remove ATF test plug -2-.
-
Hang filling hook of VAG 1924 into test plug opening, item -2-.
-
Fill with V.A.G 1924-arrow- until ATF starts draining from test plug hole.
-
Move shift lever to "P".
-
Start engine.
-
While stepping on brake pedal and engine idling, select all transmission ranges, keeping lever in each range for 10 seconds.
-
Move shift lever to "P".
-
Check ATF level and top up.
Note:
-
Be sure to follow all instructions concerning ATF level and checking and adding ATF.