audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Guide For Side Curtain Protection Airbag, B-Pillar, Removing and Installing|Page 10920 > < Guide For Side Curtain Protection Airbag, B-Pillar, Removing and Installing|Page 10918
Page 3
background image

Installing
-

Make sure that connector - 2 - engages audibly.

-

Bolt on the airbag unit

-

Tightening torque: 7 Nm (62 in.lb)

WARNING:  Make sure that nobody is in the vehicle.

See Caution for connecting Telematics battery

-

Switch on ignition and connect battery Ground (GND) strap.

NOTE:

-

After connecting battery, check vehicle equipment (radio, clock, power windows) as per Repair Manual and/or Owner's manual.

-

If the airbag Malfunction Indicator Lamp (MIL) -K75- signals a malfunction after assembling then the DTC memory must be erased and
checked again with VAG 1551 scan tool

Guide For Side Curtain Protection Airbag, B-Pillar, Removing and Installing|Page 10920 > < Guide For Side Curtain Protection Airbag, B-Pillar, Removing and Installing|Page 10918