Allroad Quattro V6-2.7L Turbo (APB) (2002)
Seat Belt: Service and Repair
Third Rear 3-Point Seat Belt (Folding Backrest), Removing and Installing
Third rear 3-point seat belt (folding backrest), removing and installing
Removing
-
Remove rear seat bench.
-
Remove bolt - 7 -.
-
Remove 2/3 backrest.
-
Push fabric aside at belt guide trim - 6 - and use screwdriver to pry out retainer tab - 11 -.
-
Remove trim - 6 - in direction of - arrow A -.
-
Remove upholstery from 2/3 backrest until backrest cover fabric and padding can be detached.
-
Remove bolt - 1 - (1x).
-
Disconnect connector - 9 - at belt tensioner if installed.
-
Remove nut - 2 - (1x).
-
Remove third rear 3-point seat belt - 3 -.