Allroad Quattro V6-2.7L Turbo (APB) (2002)
Installing
-
Insert belt tensioner - 1 - with anti-twist element.
-
Clip belt tensioner igniter wire into place at lug - 4 -.
-
Make sure that belt tensioner igniter wire is clear of belt webbing.
-
Install noise insulation cap - 2 - into position after installing bolt - 3 - and belt tensioner igniter wire.
-
Remainder of installation is carried out in reverse order of removal.
-
Belt-fastened sensor has to be checked on vehicles with belt tensioner.