Allroad Quattro V6-2.7L Turbo (APB) (2002)
Starter Motor: Service and Repair
Starter, Removing and Installing
WARNING!
Before working on electrical system, disconnect battery Ground (GND) strap.
NOTE:
-
Obtain radio code before disconnecting battery.
-
Be sure to activate vehicle features (radio, clock, electric window regulator, engine) when the battery is re-connected.
Vehicles with 6-cylinder engine
Removing
-
Generator removed
-
Unbolt line for terminal B+ -2-.
-
Disconnect connector for terminal 50 -1-.
-
Disconnect insulator from B+ connection of starter.
-
Unbolt Ground (GND) wire -1- from right engine mount.
-
Remove starter securing bolts (arrows) from transmission side, and remove starter.
Installing
Installation is the reverse of removal.
Tightening torques
Component
Nm