Allroad Quattro V6-2.7L Turbo (APB) (2002)
Front Steering Knuckle: Service and Repair
Front Wheel Bearing Housing (Aluminum), Removing and Installing
Wheel Bearing Housing (Aluminum), Removing and Installing
Removing
-
Remove hubcap, for light-alloy wheels pull off center cap (use pulling hook in vehicle tools).
-
Remove wheel.
-
Thread in all five wheel bolts again.
-
Remove bolt -1- for ABS- wheel speed sensor.
-
Unscrew hex bolt-2-.
-
Pull cable of ABS wheel speed sensor out of bracket on wheel bearing housing.
-
Unscrew bolts -1- from brake caliper and remove brake caliper.
-
Tighten hex bolt-2
-
Secure brake caliper to body using wire.
Note: Do not allow brake caliper to hang on brake hose.
-
Remove brake disc.