Allroad Quattro V8-4.2L (BAS) (2004)
Front Door Exterior Handle: Locations
Front Door Handle And Door Lock, Assembly Overview
1
-
Door handle mount
2
-
Lock cylinder
-
Before removing, remove door handle
3
-
Fulcrum lever
4
-
Door handle
5
-
Door lock
-
Disengage operating rod -8- from fulcrum lever -3- prior to removing door lock.
-
To remove, remove socket-head bolts -6- and remove door lock out downward.
6
-
Socket-head bolt (M8)
-
20 Nm (15 ft lb)
7
-
Locating pin
-
For securing door lock in "zero" position (only installed on replacement part)
-
After installing door lock and installing operating rod -8-, remove locating pin.
8
-
Operating rod
-
To remove door lock, disengage operating rod from fulcrum lever -3-.
9
-
Operating rod (door lock)